Condition

• GENERAL COMMENTS

  Item	Condition
  GENERAL COMMENTS

• PREPARE MACHINE INSPECTION

  Item	Condition
  CHECK PRODUCT LINK
  CHECK WITH CUSTOMER FOR OPERATOR COMPLAINTS
  DOWNLOAD MACHINE FAULT CODES
  IS MACHINE EQUIPPED WITH PL?
  IS PL ACTIVATED?
  IS PL FUNCTIONING PROPERLY?
  LISTEN FOR UNUSUAL NOISES
  OBSERVE ENGINE EXHAUST COLORS
  PERFORM SAFETY/PREPARATORY INSPECTION
  PREPARE THE MACHINE FOR THE INSPECTION

• LOWER-LEVEL INSPECTION

  Item	Condition
  BOGIE AXLES (MTL)
  BOGIE WHEELS (MTL)
  CHAIN DRIVE (SSL)
  DRIVE CHAIN TENSION (SSL)
  IDLER AXLES (FRONT AND REAR) (MTL)
  IDLER WHEELS (FRONT AND REAR) (MTL)
  RUBBER TRACKS (MTL)
  SPROCKETS (MTL)
  TIRES AND RIMS (SSL)	Cuts in tires
  TRACK DRIVE FRAME AND/OR MACHINE FRAME (MTL/SSL)
  TRACK DRIVES (MTL)
  TRACK TENSIONER (MTL)

• MIDDLE LEVEL INSPECTION

  Item	Condition
  AIR CLEANER ASSEMBLY
  BATTERY AND BATTERY CABLES
  BELTS, COMPRESSOR CLUTCH, AND PULLEYS
  CAB EXTERIOR
  CAB INTERIOR
  CYLINDER HEAD AND VALVE COVER
  ENGINE ACCESS DOOR
  ENGINE MOUNTS
  ENGINE OIL PAN
  ENGINE WIRING HARNESS
  EXHAUST MANIFOLD
  FAN GUARD AND FAN
  FUEL PRIMING PUMP, FUEL LINES, AND FUEL INJECTION PUMP
  HORN AND/OR BACKUP ALARM
  HYDROSTATIC PUMP AND MOTOR COMPARTMENT (MUST TILT CAB FOR ACCESS)
  RADIATOR AND RADIATOR GUARD TILT MECHANISMS
  RADIATOR CAP
  RADIATOR GUARD
  RADIATOR HOSES AND OIL COOLER LINES
  RADIATOR, OIL COOLER, CONDENSER
  STEPS AND HANDRAILS
  TURBO CHARGER
  WATER PUMP
  WORK LIGHTS

• IMPLEMENTS/ATTACHMENTS

  Item	Condition
  AREA AROUND LIFT ARMS
  BUCKET
  BUCKET TIPS AND ADAPTERS
  COUPLER	Coupler pin bolts and ears bent. No affect on operation
  COUPLER CYLINDER
  CUTTING EDGES	Bucket in used condistion and has wear on it. Welded on edge.
  LIFT CYLINDER
  TILT CYLINDERS

• SITE CONDITIONS

  Item	Condition
  AIR QUALITY
  ALTITUDE
  AMBIENT TEMPERATURE
  HAUL ROAD CONDITION
  HAUL ROAD GRADE
  HUMIDITY
  MACHINE UTILIZATION
  MAINTENANCE PRACTICES
  PRIMARY INDUSTRIES
  UNDERFOOT CONDITIONS
  WORKING MATERIAL

• HYDRAULICS PERFORMANCE CHECKS

  Item	Condition
  CYLINDER DRIFT TEST (MAXIMUM ALLOWABLE MOVEMENT AFTER 1 MINUTE)
  HYDRAULIC COUPLER SPEED TEST
  LIFT CYLINDER SPEED TEST
  OPERATION OF TWO SPEED FUNCTION TEST: MACHINE SPEED DECREASES WHEN FAST MODE IS DEACTIVATED
  OPERATION OF TWO SPEED FUNCTION TEST: MACHINE SPEED INCREASES WHEN FAST MODE IS ACTIVATED
  TILT CYLINDER SPEED TEST
  TRACKING OF MACHINE (DRIFT) TEST (MAXIMUM ALLOWABLE DRIFT AFTER 30.5M (100FT) OF TRAVEL